AC String Inverter Cables
Method of determination
CalculatedEstimated accuracy
100%string
String Inverter architecture
String Inverter with AC Combiner architecture
string+AC string inverter cables are the cables connecting the string inverters to either the Power Transformation Stations (PTS) (for string architecture) or AC combiner boxes (for string+ architecture).
These lengths are calculated automatically using AUTOPV’s advanced routing algorithms. By default the lengths include an additional 1 m per cable run as well as an additional 1% of the total length per cable run.
These tolerances can be set as advanced configuration settings that may not be available to all users.
Calculation
\[
L_{cable}=(L^{\prime}_{cable}+l_m) \times (1+l_{\text{%}})
\]
where:
\[\begin{align*}
L^{\prime}_{cable}&=\text{Actual cable length} \\
l_m&=\text{Length correction applied to cable section in}\ m \\
l_{\text{%}}&=\text{Length correction applied to cable section in}\ \text{% of cable length} \\
\end{align*}\]
‼️ This value is auto generated by AUTOPV™, subsequent modification may invalidate the design outcomes.